Insulating Materials Dielectric strength Thermal Class Shrinkage
%
Inner Diameter mm Tube Length mm Insulator cap Types
Mylar A
(Polyester Film Type A)
4 – 19kV
ASTM D 149
B – 130°C No 1,8 – 150 6,6 – 14.000 Ultrasonic Welded
Mylar HS
(Polyester Film Type HS)
3,5 – 7kV
ASTM D 149
B – 130°C 35 1,8 – 150 6,6 – 14.000 Ultrasonic Welded
Bullnose
Polyester Film Type AHS – 2LSO 3,5 – 7kV
ASTM D 149
B – 130°C 20 1,8 – 150 6,6 – 14.000 Semicap Ultrasonic Welded
DMD Woven/No-Woven Polyester 7 – 8kV
ASTM D 149
B – F / 130-155°C No 1,8 – 150 6,6 – 14.000 Ultrasonic Welded
Bullnose
Nomex – Mylar A
(Polyester Type A)
4 – 19kV
ASTM D 149
F – H / 155-180°C No 1,8 – 150 6,6 – 14.000 Ultrasonic Welded
Nomex – Mylar HS
(Polyester Type HS)
4 – 19kV
ASTM D 149
F – H / 155-180°C 30 1,8 – 150 6,6 – 14.000 Ultrasonic Welded
Bullnose
Nomex 410 – 411 – 464 – 864
9 – 35kV
ASTM D 149
H – 180 °C No 1,8 – 150 6,6 – 14.000 On request
Kapton
(Polyimide Film)
240 – 303kV
ASTM D 149
C > 255 °C No 1,8 – 150 6,6 – 14.000 Ultrasonic Welded
Nomex/Kapton 17 – 33kV
ASTM D 149
H – C 220 °C No 1,8 – 150 6,6 – 14.000 On request
Nomex/Kapton/Nomex 17 – 33kV
ASTM D 149
H – C 220 °C No 1,8 – 150 6,6 – 14.000 On request
Dielectric Kraft Paper 8 kV
ASTM D 149
A – 105°C No 1,8 – 150 6,6 – 14.000 On request

Mylar – Kapton – Nomex© are DuPont registered trademarks.


Politubes uses only the best high quality films UL approved available from the global leading manufacturers, all of which provide excellent electrical, thermal, chemical insulation and mechanical properties.

Politubes multilayer products combine all the properties in terms of dielectric strenght and mechanical shrinkage of each film in order to meet the specific needs of customers.

Our tubes and insulator caps are PFAS free and they offer insulation class between thermal class A – 105°C, B – 130°C, class F – 155°C, class H – 180°C till class C > 400°C.

Dielectric strenght of our tubes and end caps is between 3 kV/mm till 300 kV/mm with reference to the standard: ASTM D-149.

From a mechanical point of view our tubes and end caps can use stable, low shrink AHS – 2LSO (10 – 15% shrinkage) and high shrink HS (40% shrinkage) films.

Politubes uses a barcode system to trace the raw materials used in order to guarantee a high standard of control as confirmed by the UL TEOU2-TEOU8 E350605 and ISO 9001:2015 certifications.

Our R&D office is always engaged in the research and development of new materials which can provide technical and economic benefits to our customers.